to our customers, old company name in catalogs and other documents on april 1 st , 2010, nec electronics corporation merged with renesas technology corporation, and renesas electronics corporation took over all the business of both companies. therefore, although the old company name remains in this document, it is a valid renesas electronics document. we appreciate your understanding. renesas electronics website: http://www.renesas.com april 1 st , 2010 renesas electronics corporation issued by: renesas electronics corporation (http://www.renesas.com) send any inquiries to http://www.renesas.com/inquiry.
notice 1. all information included in this document is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas el ectronics products li sted herein, please confirm the latest product information with a renesas electronics sales office. also , please pay regular and careful attention to additional and different information to be disclosed by rene sas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electroni cs products or techni cal information descri bed in this document . no license, express, implied or otherwise, is granted hereby under any patents, copyri ghts or other intell ectual property right s of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any re nesas electronics product, wh ether in whole or in part . 4. descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully re sponsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the proc edures required by such laws and re gulations. you should not use renesas electronics products or the technology described in this docum ent for any purpose relating to mil itary applicati ons or use by the military, including but not l imited to the development of weapons of mass de struction. renesas electronics products and technology may not be used for or incor porated into any products or systems whose manufacture, us e, or sale is prohibited under any applicable dom estic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing th e information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. renesas electronics products ar e classified according to the following three quality grades: ?standard?, ?high quality?, an d ?specific?. the recommended applications for each renesas electronics product de pends on the product?s quality grade, as indicated below. you must check the qua lity grade of each renesas electronics pr oduct before using it in a particular application. you may not use any renesas electronics produc t for any application categorized as ?speci fic? without the prior written consent of renesas electronics. further, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. re nesas electronics shall not be in any way liable for any damages or losses incurred by you or third partie s arising from the use of any renesas electronics product for a n application categorized as ?specific? or for which the product is not intende d where you have failed to obtain the prior writte n consent of renesas electronics. the quality grade of each renesas electronics product is ?standard? unless otherwise expressly specified in a renesas electr onics data sheets or data books, etc. ?standard?: computers; office equipmen t; communications e quipment; test and measurement equipment; audio and visual equipment; home electronic a ppliances; machine tools; personal electronic equipmen t; and industrial robots. ?high quality?: transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; an ti- crime systems; safety equipment; and medical equipment not specif ically designed for life support. ?specific?: aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support device s or systems), surgical im plantations, or healthcare intervention (e.g. excision, etc.), and any other applicati ons or purposes that pose a di rect threat to human life. 8. you should use the renesas electronics pr oducts described in this document within the range specified by renesas electronics , especially with respect to the maximum ra ting, operating supply voltage range, movement power volta ge range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions o r damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its produc ts, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate a nd malfunctions under certain use conditions. fur ther, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physic al injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safe ty design for hardware and software in cluding but not limited to redundancy, fire control and malfunction prevention, appropri ate treatment for aging degradation or an y other appropriate measures. because the evaluation of microcomputer software alone is very difficult , please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesa s electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regul ate the inclusion or use of c ontrolled substances, including wi thout limitation, the eu rohs directive. renesas electronics assumes no liability for damage s or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any form, in w hole or in part, without prio r written consent of renes as electronics. 12. please contact a renesa s electronics sales office if you have any questi ons regarding the informat ion contained in this document or renesas electroni cs products, or if you have any other inquiries. (note 1) ?renesas electronics? as used in this document means renesas electronics corporation and also includes its majority- owned subsidiaries. (note 2) ?renesas electronics product(s)? means any product developed or manufactured by or for renesas electronics.
1996 preliminary data sheet silicon transistor the m pa810t has built-in 2 low-voltage transistors which are designed to amplify low noise in the vhf band to the uhf band. features ? low noise nf = 1.2 db typ. @ f = 1 ghz, v ce = 3 v, i c = 7 ma ? high gain |s 21e | 2 = 9.0 db typ. @ f = 1 ghz, v ce = 3 v, i c = 7 ma ? a small mini mold package adopted ? built-in 2 transistors (2 2sc4226) ordering information part number quantity packing style m pa810t loose products embossed tape 8 mm wide. pin 6 (q1 (50 pcs) base), pin 5 (q1 emitter), pin 4 (q2 emitter) face to perforation side of the tape. m pa810t-t1 taping products (3 kpcs/reel) remark if you require an evaluation sample, please contact an nec sales representative. (unit sample quantity is 50 pcs.) absolute maximum ratings (t a = 25 c) parameter symbol rating unit collector to base voltage v cbo 20 v collector to emitter voltage v ceo 12 v emitter to base voltage v ebo 3v collector current i c 100 ma total power dissipation p t 150 in 1 element mw 200 in 2 elements note junction temperature t j 150 ?c storage temperature t stg C65 to +150 ?c note 110 mw must not be exceeded in 1 element. m pa810t high-frequency low noise amplifier npn silicon epitaxial transistor (with built-in 6-pin 2 2sc4226) small mini mold package drawings (unit: mm) document no. p11463ej1v0ds00 (1st edition) date published june 1996 p printed in japan the information in this document is subject to change without notice. pin configuration (top view) pin connections
1. collector (q1)
2. base (q2)
3. collector (q2)
4. emitter (q2)
5. emitter (q1)
6. base (q1)
6
5
4
1
2
3
q 1
q 2
2.1?.1
1.25?.1
1
2
3
6
5
4
0.2 ?
+0.1
0.65
0.65
1.3
2.0?.2
0.9?.1
0.7
0 to 0.1
0.15 ?
+0.1
x
y
m pa810t 2 electrical characteristics (t a = 25 c) parameter symbol condition min. typ. max. unit collector cutoff current i cbo v cb = 10 v, i e = 0 1 m a emitter cutoff current i ebo v eb = 1 v, i c = 0 1 m a dc current gain h fe v ce = 3 v, i c = 7 ma note 1 70 250 gain bandwidth product f t v ce = 3 v, i c = 7 ma 3.0 4.5 ghz feed-back capacitance c re v cb = 3 v, i e = 0, f = 1 mhz note 2 0.7 1.5 pf insertion power gain |s 21e | 2 v ce = 3 v, i c = 7 ma, f = 1 ghz 7 9 db noise figure nf v ce = 3 v, i c = 7 ma, f = 1 ghz 1.2 2.5 db h fe ratio h fe1 /h fe2 v ce = 3 v, i c = 7 ma 0.85 a smaller value among h fe of h fe 1 = q1, q2 a larger value among h fe of h fe 2 = q1, q2 notes 1. pulse measurement: pw 350 m s, duty cycle 2 % 2. measured with 3-pin bridge, emitter and case should be connected to guard pin of bridge. h fe classification rank fb gb marking 24r 25r h fe value 70 to 140 125 to 250 typical characteristics (t a = 25 c) 200
100
0
50
100
150
ambient temperature t a (?c)
total power dissipation p t (mw)
p t e t a characteristics
20
10
0
0.5
1.0
v ce = 3 v
base to emitter voltage v be (v)
collector current i c (ma)
i c e v be characteristics
25
20
15
10
5
0
5
10
i c e v ce characteristics
collector current i c (ma)
collector to emitter voltage v ce (v)
collector current i c (ma)
200
100
50
20
10
0.5
1
5
10
50
v ce = 3 v
dc current gain h fe
h fe e i c characteristics
80 a
40 a
20 a
60 a
2 elements in total
per element
i b = 160 a
m
140 a
m
120 a
m
100 a
m
m
m
m
m
m pa810t 3 6
4
2
0
0.5
1.0
5.0
10
50
100
v ce = 3 v
f = 1 gh z
collector current i c (ma)
noise figure (db)
nf e i c characteristics
24
20
16
12
8
4
0
0.1
0.2
0.5
1.0
2.0
5.0
frequency f (gh z )
insertion power gain l s 21e l 2 (db)
l s 21e l 2 e f characteristics
v ce = 3 v
i c = 7 ma
feed-back capacitance c re (pf)
5.0
1.0
0.5
0.2
0.1
1
2
5
10
20
50
f = 1 mh z
c re e v cb characteristics
collector to base voltage v cb (v)
2.0
15
10
5
0
0.5
1
5
10
50
100
insertion power gain l s 21e l 2 (db)
collector current i c (ma)
v ce = 3 v
f = 1.0 gh z
l s 21e l 2 e i c characteristics
20
10
5
2
1
0.5
1
5
10
50
collector current i c (ma)
f = 1.0 gh z
v ce = 3 v
gain bandwidth product f t (gh z )
f t e i c characteristics
m pa810t 4 s-parameters v ce = 3 v, i c = 1 ma frequency s 11 s 21 s 12 s 22 mhz mag ang mag ang mag ang mag ang 100.00 0.959 e26.1 3.680 162.0 0.045 77.2 0.983 e9.0 200.00 0.920 e48.3 3.305 146.4 0.080 63.8 0.937 e15.8 300.00 0.838 e69.2 2.972 131.3 0.111 50.1 0.863 e23.0 400.00 0.810 e85.6 2.612 121.4 0.128 43.5 0.815 e26.3 500.00 0.775 e100.0 2.367 110.9 0.137 34.7 0.745 e29.1 600.00 0.767 e115.0 2.149 104.1 0.147 30.8 0.724 e31.7 700.00 0.745 e127.0 1.986 93.8 0.147 25.1 0.693 e33.2 800.00 0.722 e137.7 1.854 87.9 0.150 21.5 0.682 e36.5 900.00 0.711 e146.4 1.655 80.0 0.143 20.5 0.668 e39.2 1000.00 0.715 e155.0 1.541 74.0 0.140 17.1 0.644 e43.7 1100.00 0.708 e163.2 1.414 69.2 0.136 19.0 0.623 e46.8 1200.00 0.697 e171.9 1.340 63.3 0.134 18.0 0.594 e50.1 1300.00 0.688 e177.1 1.271 59.5 0.132 18.5 0.577 e52.7 1400.00 0.675 178.8 1.174 54.4 0.122 20.1 0.559 e55.3 1500.00 0.706 173.6 1.119 49.8 0.118 21.9 0.559 e58.3 1600.00 0.725 168.7 1.058 47.5 0.111 29.5 0.549 e61.9 1700.00 0.723 161.1 1.007 43.9 0.114 33.2 0.547 e66.8 1800.00 0.718 156.4 0.998 40.8 0.119 40.8 0.537 e71.6 1900.00 0.702 152.5 0.957 36.2 0.126 44.1 0.526 e76.8 2000.00 0.716 149.8 0.943 31.1 0.137 47.1 0.514 e81.8 v ce = 3 v, i c = 3 ma frequency s 11 s 21 s 12 s 22 mhz mag ang mag ang mag ang mag ang 100.00 0.878 e39.3 9.289 153.2 0.041 71.5 0.941 e17.3 200.00 0.788 e69.5 7.675 133.1 0.068 55.9 0.807 e28.4 300.00 0.685 e93.9 6.222 117.5 0.087 44.8 0.674 e36.5 400.00 0.634 e111.2 5.151 108.1 0.094 41.7 0.588 e39.0 500.00 0.603 e125.2 4.360 99.6 0.100 37.3 0.511 e40.5 600.00 0.591 e137.9 3.838 94.6 0.105 37.7 0.475 e41.3 700.00 0.573 e148.5 3.378 86.0 0.107 36.4 0.443 e41.5 800.00 0.566 e156.8 3.215 82.1 0.113 36.7 0.425 e43.2 900.00 0.563 e163.4 2.821 75.6 0.114 38.8 0.408 e45.0 1000.00 0.573 e170.3 2.594 70.7 0.118 38.3 0.385 e48.2 1100.00 0.577 e177.2 2.359 67.2 0.122 41.5 0.365 e50.7 1200.00 0.572 175.4 2.200 62.2 0.128 41.7 0.343 e53.3 1300.00 0.563 171.4 2.084 58.8 0.136 42.9 0.326 e55.1 1400.00 0.555 168.5 1.904 54.8 0.138 43.8 0.309 e57.1 1500.00 0.584 164.9 1.803 50.5 0.146 44.3 0.301 e59.6 1600.00 0.603 161.2 1.700 48.7 0.150 48.4 0.290 e62.8 1700.00 0.608 154.7 1.616 45.4 0.161 47.8 0.281 e67.3 1800.00 0.607 150.8 1.591 42.4 0.173 50.0 0.268 e72.3 1900.00 0.598 147.7 1.523 38.1 0.183 48.8 0.255 e77.4 2000.00 0.612 145.8 1.488 32.8 0.197 47.7 0.244 e82.6
m pa810t 5 s-parameters v ce = 3 v, i c = 5 ma frequency s 11 s 21 s 12 s 22 mhz mag ang mag ang mag ang mag ang 100.00 0.803 e48.9 13.450 147.0 0.040 65.9 0.892 e23.3 200.00 0.693 e83.5 10.285 124.9 0.059 54.1 0.705 e36.2 300.00 0.594 e108.3 7.895 110.2 0.073 45.6 0.557 e43.4 400.00 0.548 e125.1 6.305 101.7 0.080 44.7 0.468 e45.0 500.00 0.528 e138.0 5.237 94.4 0.086 42.6 0.398 e45.4 600.00 0.520 e149.3 4.554 90.4 0.092 45.2 0.363 e45.2 700.00 0.508 e158.7 3.961 82.8 0.097 45.4 0.334 e44.8 800.00 0.505 e165.6 3.624 79.1 0.106 46.4 0.317 e46.0 900.00 0.505 e171.1 3.283 73.6 0.112 48.6 0.301 e47.1 1000.00 0.519 e176.9 3.009 69.1 0.120 48.0 0.279 e49.9 1100.00 0.527 177.0 2.729 66.0 0.127 50.1 0.262 e52.2 1200.00 0.525 170.1 2.536 61.5 0.135 49.4 0.243 e54.7 1300.00 0.518 166.6 2.399 58.3 0.147 49.9 0.227 e56.2 1400.00 0.513 164.1 2.188 54.6 0.151 50.2 0.211 e57.7 1500.00 0.539 161.2 2.067 50.6 0.162 49.5 0.202 e60.2 1600.00 0.558 158.0 1.945 48.9 0.169 52.1 0.190 e63.7 1700.00 0.565 152.1 1.847 46.0 0.181 50.8 0.179 e68.3 1800.00 0.567 148.5 1.814 43.0 0.194 51.9 0.166 e74.4 1900.00 0.561 145.6 1.737 38.9 0.205 49.8 0.152 e80.5 2000.00 0.574 144.1 1.693 33.8 0.219 47.9 0.142 e86.6 v ce = 3 v, i c = 7 ma frequency s 11 s 21 s 12 s 22 mhz mag ang mag ang mag ang mag ang 100.00 0.729 e58.5 17.087 141.0 0.037 66.1 0.838 e29.0 200.00 0.612 e95.4 12.153 118.7 0.052 52.6 0.618 e42.2 300.00 0.529 e119.9 9.023 105.1 0.064 47.7 0.467 e48.4 400.00 0.492 e135.6 7.052 97.4 0.072 48.8 0.382 e49.2 500.00 0.481 e147.4 5.805 91.0 0.078 49.2 0.321 e48.7 600.00 0.476 e157.4 4.986 87.6 0.087 51.9 0.291 e47.9 700.00 0.469 e166.0 4.341 80.7 0.094 52.3 0.265 e47.0 800.00 0.469 e171.8 3.951 77.3 0.106 53.1 0.248 e47.6 900.00 0.471 e176.4 3.408 71.8 0.112 54.6 0.233 e48.7 1000.00 0.487 178.6 3.268 68.1 0.123 53.4 0.213 e51.0 1100.00 0.497 172.9 2.959 65.2 0.132 55.1 0.197 e53.1 1200.00 0.496 166.5 2.748 60.9 0.142 53.9 0.179 e55.6 1300.00 0.490 163.3 2.598 57.8 0.155 54.0 0.164 e57.0 1400.00 0.485 161.2 2.365 54.4 0.161 53.4 0.149 e59.0 1500.00 0.513 158.7 2.230 50.5 0.172 52.0 0.140 e61.3 1600.00 0.531 155.9 2.100 49.0 0.180 54.1 0.127 e65.2 1700.00 0.539 150.3 1.990 46.2 0.194 52.2 0.115 e70.6 1800.00 0.543 146.9 1.955 43.4 0.207 52.8 0.102 e78.3 1900.00 0.539 144.2 1.867 39.4 0.218 50.2 0.088 e87.0 2000.00 0.552 142.6 1.820 34.3 0.233 47.9 0.080 e95.5
m pa810t 2 no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec corporation. nec corporation assumes no responsibility for any errors which may appear in this document. nec corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. no license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec corporation or others. while nec corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. to minimize risks of damage or injury to persons or property arising from a defect in an nec semiconductor device, customer must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. nec devices are classified into the following three quality grades: standard, special, and specific. the specific quality grade applies only to devices developed based on a customer designated quality assurance program for a specific application. the recommended applications of a device depend on its quality grade, as indicated below. customers must check the quality grade of each device before using it in a particular application. standard: computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots special: transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) specific: aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. the quality grade of nec devices in standard unless otherwise specified in nec's data sheets or data books. if customers intend to use nec devices for applications other than those specified for standard quality grade, they should contact nec sales representative in advance. anti-radioactive design is not implemented in this product. m4 94.11
|
